Material Safety Data Sheet

Palladium

Section 1 – Chemical Product and Company Identification

Product Name: Palladium

Section 2 -Product Identification :

Product Name Palladium

SynonymsPalladium on activated carbon

CAS7440-05-3

FormulaPd

Molecular Weight106.42

EINECS231-115-6

Section 3 – Physical and Chemical Properties

Appearance Wire

Solubility in water Insoluble

Melting Point 1555℃

Density1.025 g/mL at 25 °C

Boiling Point 2970 °C

Merck 14,6989

Section 4 – Stability

Stable. Flammable – fine powder may cause fire or explosion in air. Incompatible with ozone, sodium tetrahydroborate, sulphur, arsenic.

Section 5 – Hazards Identification

Emergency OverviewIrritating to skin, eyes and respiratory tract.Irritating to skin, eyes and respiratory tract.

Primary Routes of ExposureInhalation, skin, eyes.

Eye ContactCauses slight to mild irritation to the eyes.

Skin ContactCauses slight to mild irritation to the skin.

InhalationIrritating to the nose, mucous membranes and respiratory tract.

Ingestion No information available on the physiological effects of ingestion. May be harmful if swallowed.

Section 6 – Exposure Controls/Personal Protection

Eye Exposure

Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need assistance in keeping their eye lids open. Get immediate medical attention.Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need assistance in keeping their eye lids open. Get immediate medical attention.

Skin Exposure

Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if irritation persists.

Inhalation

Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.

Poison Class Not available

Ingestion Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce vomiting only if directed by medical personnel.

Section 7 – Fire Fighting Measures

Flash Point N/A

FlammabilityN/A

Extinguishing Media

Carbon dioxide, dry chemical powder, or appropriate foam.

Firefighting

If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self-contained breathing apparatus and full protective clothing.

Section 8 – Accidental Release Measures

Small spills/leaks

Small spills can be mixed with vermiculite, sodium carbonate or other suitable non-combustible adsorbent and swept up.

Section 9 – Handling and Storage

Handling and storage: Keep container tightly closed. Keep moist. Becomes flammable when dry.Keep container tightly closed. Keep moist. Becomes flammable when dry.

Section 10 – Stability and Reactivity

StabilityAir and moisture stable

Hazardous Polymerization no hazardous polymerization

Conditions to Avoid If dried, contact with alcohols may cause fire.

Incompatibility Carbon monoxide, carbon dioxide, palladium and palladium oxide.

Section 11 -Transportation Information

Non-hazardous for air and ground transportation.

Section 12 – Additional Information

However The information above is believed to be accurate and represents the best information currently available to us., we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Fisher be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Fisher has been advised of the possibility of such damages. Copyright 2010  YURUI (SHANGHAI) CHEMICAL CO.,LTD License granted to make unlimited paper copies for internal use only.



评论

该日志第一篇评论

发表评论

评论也有版权!